Flooring Systems / Epoxy-Coal Tar Based, Solvent Free Coating

EPOCOL 220

Description

EPOCOL 220 is an epoxy-coal tar based, solvent free, two component, low viscosity coating and waterproofing material.

Fields of Application

• EPOCOL 220 has been specifically developed for coating and waterproofing on concrete, metal, wood and likely materials
• It protects surfaces exposed to sea against corrosion
• EPOCOL 220 especially does not allow microbiological contamination and vegetation
• It is used in protecting indoor and outdoor surfaces at waste water, outdoor surfaces at clean water facilities, all kind of underground facilities such as canal, foundation and pipeline

Features and Benefits

• Fills the pore of the application subsrates such as betone, metal etc
• Resistance to mechanical influences, water and chemicals
• Easy to mix and apply
• After curing time, it begins a sound and hard paint
• Solvent free. It can be used at closed areas

Application Procedure

Preparation of Substrate

The surface must be dry, sound, moisture free and clear of materials which prevent bonding, such as dust, oil, paint, silicone, curing agents and detergents. Loose materials on the surface must be removed; cracks on surface must be repaired. Humidity must be max %4. Smooth surfaces should be roughened.

Application Method

Part A should be mixed on its package with low speed electrical mixer during 1 minute until get a homogenous state. Part B is added on Part A, mixture is stirred 3 minutes until get a homogenous mixture. Application should be done with roll, brush or spray. Mixture pot time changes according to weather conditions. This time is nearly 60 minutes, but the time can be reduce in hot weather, can be increase in cold weather. Applied surface should be protected from water, rain, freeze.

Consumption

0,300 - 0,450 kg/m² for each layer.

Package

A + B components = 20 kg set