Flooring Systems / Epoxy-Coal Tar and Solvent Based Coating

EPOCOL 110

Description

EPOCOL 110 is an epoxy-coal tar and solvent based , two component, low viscosity coating and waterproofing material

Fields of Application

EPOCOL 110 has been specifically developed for coating and waterproofing on concrete, metal, wood and likely materials. It is used in protecting indoor and outdoor surfaces at waste water, outdoor surfaces at clean water facilities, all kind of underground facilities such as canal, foundation and pipeline

Features and Benefits

• Fills the pore of the application subsrates such as betone, metal etc
• Provides excellent adhesion to top layer polyurethane system
• Resistance to mechanical influences, water and chemicals
• Easy to mix and apply
• After curing time being a sound and hard paint
• Excellent adhesion to common surfaces like steel, concrete, stone, artificial stone, wood, etc
• Adhesion does not deteriorate if product submersed in water, sea water, sewage and oils

Application Procedure

Preparation of Substrate

The surface must be dry, sound, moisture free and clear of materials which prevent bonding, such as dust, oil, paint, silicone, curing agents and detergents. Loose materials on the surface must be removed; cracks on surface must be repaired. Humidity must be max %4. Smooth surfaces should be roughened

Application Method

Part A should be mixed on its package with low speed electrical stirrer during 1 minute until get a homogenous state. Part B is added on Part A, mixture is stirred 3 minutes until get a homogenous mixture. Application should be done with roll, brush or spray. Mixture pot time changes according to weather conditions. This time is nearly 60 minutes, but the time can be reduce in hot weather, can be increase in cold weather. Applied surface should be protected from water, rain, freeze

Consumption

0,300 - 0,450 kg/m² for each layer

Package

A + B components = 11 kg set